TX001 Electric Jumper Wire Soldering Iron

Introduction

The TX001 electric soldering iron is small in size, easy to carry and use, and suitable for soldering jump wire/solder wire on the motherboard. Very quickly heating up, just 2 seconds up to 380 degrees. Quick cooling, automatic sleep, wake up with a touch, 3-gear adjustable temperature. With TYPE-C power supply interface, and charge with a power bank or other USB power supply.

Specification

Brand: PHONEFIX

Model: TX001

Name: Electric Jump Wire Soldering Iron

Color: Blue

Voltage: 5-12V

Current: 1-5.9A

Temperature: 0-450 (350-400-450 degrees adjustable)

Notice
The non-standard charger without QC quick charging protocol may affect the heating rate while the non-standard soldering iron tin may lead to inaccurate temperature.

Features

1. Three levels of temperature adjustable(350-400-450 degrees).

2.With status light

3. Support QC protocol, charging head automatic voltage boost

4. Type-c sockets in a gold-plated process, high current does not generate heat.

5. The heating core clamping shrapnel adopts the same material as the JBC handle.

6. Standard 66W quick charger with QC agreement.

7. Lightweight handle, metal button, one key switch.

Working Mode

1. One key switching, three levels of temperature adjustable.

2. Green light mode 350℃, blue light mode 400, red light mode 450℃, and yellow light is at sleep mode.

3. The green, blue and red light stays on showing it's on heating.

4. Flashing green-blue-red light indicates that the temperature has reached the set value.

Notes

1. Using a non-standard charger or without a QC protocol may affect the heating speed!

2. Using a non-standard soldering tip can cause temperature inaccuracies!

3. Slow heating up or irregular light flashing means that the charger does not have a QC protocol and the voltage does not rise to 12V!

4. When installing the soldering iron tip, please pull out the USB cable and insert the soldering iron tip from the top down on the tabletop.

5. The portable soldering iron can not replace the soldering station! Only suitable for on-site maintenance, soldering jump wire, and small bonding pad.

Troubleshooting Methods

1. If the white light is displayed all the time, it means that the soldering iron tip is broken or not inserted into place!

2. If the light is not on and does not heat up when plugging in the charging cable, you need to unplug the soldering iron tip to observe.

3. If the light is on and there's no color, that means the charger power is too low. If the light is not on, please replace the charger or charging cable.

Warranty Agreement

1. The handle and charger of this product are warranted for one year, and there is no warranty on the heating core.

2. Please use the matching charger and heating core.

3. There is no warranty if the product is damaged by using the heating core of other factories.

Packing

carton case