Semi Automatic Dispenser Machine 220V RWRF100404

Product introduction:

Manual dispensing machine is in manual way, in the PCB panel need to patch locations pre point special glue, to fixed patch element mechanical device. Functional diversity, manual dispensing machine can not only for dispensing operation, but also can be used for solder joints, in the experimental process eliminates the need for individual PCB template expenses and ensure good welding quality, is the first choice for many labs and companies.

Index Parameter:

Power supply: AC 220V / 110V

Power consumption: <8W

Air source: Maximum 0.99MPa (clean dry air without lubrication)

Discharge pressure adjustment range: 0.05MPa--0.99MPa

Function mode: manual mode / semi-automatic mode (quantitative discharge)

Vacuum suction function: adjustable negative pressure control to 600 mm Hg

Repeat accuracy and discharge frequency: accuracy: + 0.05% frequency: 600 times / min

Minimum discharge volume: 0.01ml

Product features:

Automatic operation (auto) (suitable for quantitative and non dispensing timing)

The automatic switch to the auto position of the

The adjustment of pressure and flow right glue suitable choice needles can control liquid

The each step a foot switch liquid will set in accordance with the volume of the plastic automatically from the needle tip hole drops out

Operated by hand (manual) (for non quantitative and non timing dispensing)

Turn the switch to manual position

Adjust the air pressure and select the appropriate needle.

On the pedal switch liquid will drop out from the needle tip hole release pedal switch stop liquid drop out.

It has two methods of operation:

(1) Automatic operation (auto) (suitable for quantitative and non-timed dispensing)

Set the switch to the auto position.

Adjust the air pressure and the amount of glue, select the appropriate needle nozzle can control the correct flow of liquid material.

Every time you step on the foot switch, the liquid material will automatically drop out from the needle tip hole according to the set glue output.

(Two) manual operation (applicable to non-quantitative, non-timed dispensing)

Turn the switch to the manual position.

Adjust the air pressure and select the appropriate needle.

Depress the foot switch, the liquid material will drip out from the needle tip hole, release the foot switch, the liquid material will stop dripping.

Packing

Paper box + shockproof foam box + carton box